Scope Mounts for Savage Model 24 OU Shotgun Rimfire Perfect-Adapter™ Gun-Guides®

Description

BACK IN STOCK!    NOW 20% off our normal .95
We have sold hundreds of these custom two piece mounts with 100% positive feedback.
Product Description
Optic Mounts for Savage Model 24 Series Shotguns
NEW 2 PIECE LOW PROFILE DESIGN: Adjust as needed - Use one or both!
Finally, there's an alternative to the original Savage 24 Series open sights.
Fits ALL .22 LR & 22 WMR over .410, 20 GA. and 12 GA.
Made from lightweight aircraft aluminum.
Matt/Satin black finish.
Mounts securely into the two factory grooves cut into the upper rimfire barrel found on Savage O/U 24 C,D,F,&G models.
Will not fit
Model 24's that have a centerfire upper barrels (30-30, 223, ect.)
RINGS and OPTICS as shown above are NOT included.
INCLUDES:
Standard Weaver slot
2 Mounts with 2 Mounting Bolts installed.
2  3/32" Allen/Hex Wrenches
Mounts are about 1.5" inches in length.
* We ship the same or next business day.
UPC: 045635885646
FAQ:
What rings are on the scope images?
We have used each of these with great success:
Weaver Grand Slam Weaver-Style Rings Lever Lock Rings
Warne Maxima Quick-Detachable Weaver-Style Rings
Leupold QRW Quick-Release Weaver-Style Rings
How do I custom fit the mounts if they are too tight or too loose?
STEP 1: Completely remove the screws.
IF MOUNT(S) are TOO TIGHT:
where they will not easily slide with just a slight bit tension. We will need to spread the gap on the underside of the mount. Place each mount on a hard surface and insert a flat head screw driver or small pry bar
as shown above in our image gallery.
GENTLY tap with a small hammer to spread the gap the slightest amount necessary and test fit on the rifle.
Test fit on the rifle.
Repeat if needed.
Replace the screws and tighten to around 15 or less INCH POUND. (finger snug by inserting the long end of the wrench to avoid extra leverage).
IF MOUNTS ARE TO TOO WIDE / LOOSE:
where they will slide on to the rail and not tighten down securely. We will need to lower gap distance on the underside of the mount. Place each mount on a hard surface as shown below. Use a small plastic hammer or use a small non-marring piece of wood and slightest amount necessary GENTLY tap downward to tighten the clamp
(
as shown above in our image gallery.
)
Test fit on the rifle...
Repeat if needed. Replace the screws and tighten to around 15 or less INCH POUND. (finger snug by inserting the long end of the wrench to avoid extra leverage).
★★★★★
FLAT RATE SHIPPING IN THE USA
:
USPS First Class Mail the same or next business day that we receive your order.
You will receive a message with the delivery confirmation and tracking number.
Additional Guides added to the cart will add only .00 per Guide for shipping.
INTERNATIONAL SHIPPING:
USPS First Class International shipping will be automatically calculated based on quantity and location.
★★★★★
• ALL images and text are © 2018 ~ 2023  Gun-Guides, LLC. - ALL Rights Reserved.
Check out our 100% positive feedback since 1999!